Never pay for any CBT, test or assessment as part of any recruitment process. When in doubt, contact us
AECI is a South African based explosive and speciality chemical company focused on providing products and services to a broad spectrum of customers in the mining, manufacturing, agricultural, food and beverage, and general industrial sectors. it has regional and international businesses in Africa,South-East Asia, the USA and Australia.
...
Read more about this company
Job Description
- Provide information to Supervisors, Co-workers and subordinates by telephone, written communication, email or in person.
- Analyse test results, machine error messages and information obtained from operators in order to diagnose equipment faults
- Ensure the smooth functioning of measuring and control units and equipment within the plants
- Conduct Scheduled checks and inspections of measuring and control units of the plant and equipment.
- Detection and fault finding of malfunctions and the resolving thereof
- Assist with solving control related problems relating to the plant in which they are assigned to work
- Assist Engineers and Foreman in various tasks by planning and gathering data.
- Perform maintenance duties in areas of the plant as instructed by the Department Foreman
- Assist with minor projects and plant upgrades relevant to the plant and their trade
- Use trade specific knowledge and experience in the application of instruments and control engineering principles to effect practical solutions
- Work with tools and equipment to repair or service instrument and control units on plant machinery and equipment
- Guide, coach and mentor Apprentices. Identify and report on their training needs, progress and skills development
- Monitor the functioning of various plant and equipment and report findings
- Order required spares and materials from the store
- Comply with all safety regulations as per company rules and procedures as well as what is prescribed in OHS act
Qualifications & Experience
- Completed recognised apprenticeship in the Instrument Trade
- Experience in Chemical Manufacturing Plant, preferably Sulphuric acid.
- Experience with Yokogawa DCS systems.
- Experience with Endress and Hauser equipment.
- Knowledge of CMMS systems
- Computer literate.
- Must be trained in and able to use emergency safety equipment i.e. breathing apparatus sets and air mask sets in difficult conditions.
go to method of application »
Job Description
- Underground charging unit scheduled maintenance
- New equipment assembly
- Fault finding on all UBS equipment
- Standby and call out duties
- Assist the UBS engineering section in maintaining and improving existing underground equipment
Qualifications & Experience
- Matric
- Qualified Artisan with 3-5 years of experience
- Pneumatic, electric and hydraulic experience will be an advantage
- PLC Programming experience will be an advantage
- Have willingness to be trained on instrumentation and electrical equipment
- Must exhibit the following behavioural competencies; analytical thinking, thoroughness, critical information seeking, concern for standards and safety awareness
- Must be prepared to travel and go underground as required.
- Must be able to obtain a valid Red Ticket.
go to method of application »
Job Description
- Conduct product training on site.
- Actively promote benefits of products such as improved safety and improved efficiencies.
- Report any irregularities to Explosives Technical Representative.
- Develop continuous improvement practices to ensure required blasting are achieved.
- Comply with governance, established policies, systems, procedures and practices.
- Comply with Safety, Health and Environment standards.
- Continues reporting to Technical Representative and Mining Personnel.
- Manage the Performance Base Contract in a professional manner
- Compile underground visit reports.
Qualifications & Experience
- Minimum Grade 12
- Mining degree or diploma
- At least 3 years underground mining experience
- Underground blasting certificate
- Computer literate (Microsoft Office)
- Good knowledge of underground mining under different mining conditions
- Competent A and B (Advantageous)
- Coach the learner (Advantageous)
- Valid driver’s license – minimum code B
go to method of application »
Job Description
- Pick and prepare stock for loading onto trucks in accordance with picking slips.
- Communicate with Warehouse Team Leader or Despatch Controller timeously should a product not be in the warehouse as stated on the picking slip.
- Ensure FIFO system w.r.t. expired products is applied.
- Expired products to be moved to allocated area for expired products.
- Notify Warehouse Team Leader w.r.t. expired product moved to the allocated area.
- Load and offload vehicles in accordance with documentation.
- Ensure no broken or damaged products enter or leave the warehouse unless approved by the Warehouse Team Leader.
- Report faulty, broken or damaged products, leaking drums to Warehouse Team Leader.
- Ensure products (drums) are neat and clean before consolidated for despatch.
- Damaged product in the warehouse or on a vehicle is to be repacked immediately
- Ensure product is correct marked or labelled once it has been repacked.
- Communicate all discrepancies noted w.r.t. stock shortages to the Despatch Controller/Warehouse Team Leader.
- Required to drive a forklift and Reach Truck
- Complete forklift and Reach Truck checklist daily
- Keep forklift and Reach Truck battery charges in good working condition
- Report any defects on the Forklift and Reach Truck to Warehouse Team Leader
- Ensure accurate final checks of product picked and prepared for delivery
- Ensure good housekeeping standards and cleanliness are maintained in the warehouse
- Palletisation of stock, barcoding of small packs, packing of boxes onto pallets and shrink-wrapping.
- Participate in stocktakes as and when required
- Understand and adopt good warehousing and storage practises
- Uphold and work according to all internal and external safety guidelines
- Comply with SHEQ Quality system requirements and standards
- Carry out weekly checklist on correct way of racking and stacking as well as removal of damaged or broken pallets
- Report findings and action taken to the Warehouse Team Leader
- Safety drive the forklift and Reach Truck to ensure no product damage prior to loading or when unloading or stacking.
- May on occasion be required to work overtime to load or unload trucks and/or containers.
Qualifications & Experience
Minimum education
- Grade 12
- Minimum 1 years’ relevant experience in logistics, distribution, production or warehousing as a Materials Handler.
- Must be able to drive both a Forklift and Reach Truck, be medically fit to drive a Forklift and Reach Truck and be in possession of a valid Forklift as well as Reach Truck driver’s license.
- Must maintain medical fitness to drive both a forklift and Reach Truck in order to have the relevant driver’s license renewed successfully.
- Possess excellent communication (verbal and written) skills.
- Possess a sound knowledge of all Acts, i.e. hazardous chemicals, road transportation, etc.
- Must be able to work independently as well as within a team and be deadline driven.
- Must be able to report to the Despatch Controller as well as Warehouse Team Leader
- Must be in good physical condition as it is a position that requires much physical activity
- Must be very accurate and be able to work under pressure
- Computer literate with basic computer skills
go to method of application »
Job Description
- Obtain raw materials, for QC testing
- Ad hoc sampling of raw materials, in-process samples, and finished products for technical
- Maintain good housekeeping in all areas of the QC and technical Lab
- Assist technical with sending samples to the sales team for delivery to customers or customer sites.
- To wash all glassware for QC and Technical as per procedure so that it is done effectively and safely
- To transport retention samples to and from the retention room
- To maintain good practice in the retention room and dispose of expired retention samples as per procedure
- Maintain retention samples according to the waste disposal plan
- To act as a messenger when required, and perform reasonable general tasks as per request of the QC supervisor
- To adhere to all SHEQ policies and requirements, and to wear all the necessary Personal Protective Equipment (PPE) where and when necessary.
- To approve incoming packaging on Qdocs
Qualifications & Experience
- Grade 12 (with Science and Mathematics as subjects) is essential
- Basic Computer Skills
go to method of application »
Job Description
- Receive and process exports orders from Channel Partners timeously. Manage the export S-Loc, ensuring that goods are appropriately dispatched, and the capturing and processing of SAP transactions (Stock movements & Invoicing) are prioritized and done timeously.
- Formally respond to Channel Partners regarding delivery dates after discussion with relevant heads of departments.
- Report on OTIF for the department.
- Administration of repair centre quotes from all repair centres and ensure all documentation loops are closed out and filed accordingly and SAP transactions are processed (Stock movements and Invoicing).
- Manage and report on company’s freight costs.
- Prepare EIUs Shipping documents as orders come in timeously.
- Handle all imports when required.
- Establish priorities and collaborate with transportation providers to ensure prompt shipment pick-ups and track shipments.
- Monitor and manage courier costs.
- Use Freight Forwarders where possible.
- Develop and maintain a network of couriers and freight forwarders.
- Always conduct rate negotiations with couriers and freight forwarders to ensure the best rate.
- Generate Works Orders and inform Production Manager of new control equipment orders.
- Ensure all filing is always up to date and prepare previous year filing for off-site storage.
- Deal with Auditors (internal and external) when required.
- Handle customer queries.
General
- A sound working knowledge of MS Office applications i.e. Excel, Word, PowerPoint etc.
- Proven administrative excellence.
- Diploma in Logistics or equivalent.
- 3 years’ experience in logistics and exports and imports.
- Knowledge of Export and Import documentation pertaining to hazardous cargo.
- 2-3 years in Debtors and/ Store management would be advantageous.
- SAP Experience a must.
Qualifications & Experience
- Diploma in Logistics or equivalent.
- 3 years’ experience in logistics and exports and imports.
- Knowledge of Export and Import documentation pertaining to hazardous cargo.
- 2-3 years in Debtors and/ Store management would be advantageous.
- SAP Experience a must.
go to method of application »
Job Description
- Perform Final Inspection of new stock and sign the relevant A-Inspection document.
- GRN new stock into the system while following correct procedures.
- Maintain records of purchase orders, invoices, delivery details, etc.
- Initiate raw material related queries to the suppliers.
- Request COAs and extensions from procurement and suppliers when needed.
- Carry out cycle counts for all reworked stock in warehouses.
- Assist with internal and external audits.
- To comply with all ISO 9002 standards.
- To comply with all safety regulations of the company.
- Ad hoc tasks as delegated by Management
Qualifications & Experience
- Matric or NQF equivalent
- At least 2 years’ experience
- Diploma in Inventory Management will be an advantage
go to method of application »
Job Description
- Execute scheduled and routine maintenance on Trucks and LDV’s, machinery and equipment
- Perform engineering inspections, identify problem areas and implement pro-active maintenance and plant improvement corrective action
- Optimise vehicle reliability by continually improving the preventative maintenance system through the identification of opportunities for improvement.
- Provide appropriate and adequate feedback and input to the Engineering Team Manager with respect to plant condition, spares and scheduling requirements, and repairs carried out.
- Perform safety and health inspections and implement corrective action.
- Assist in the training and development of the Learner Technician Operators.
- Be actively involved in World class initiatives.
General
- Must be able to perform overtime duties and standby.
- Must be able to perform full time afternoon shift work duties.
- Must have own transport.
- Must be able to work without supervision at all times.
- Must be willing to be cross-trained on electrical and instrumentation skills
Qualifications & Experience
- Matric
- Qualified Artisan (Trade Test/ Red Seal Millwright) with several years of experience.
- Pneumatic, electric and hydraulic experience will be an advantage.
- PLC Programming experience will be an advantage.
- Computer experience and African language will be an advantage.
- Have willingness to be trained on instrumentation and electrical equipment.
- Must exhibit the following behavioural competencies; analytical thinking, thoroughness, critical information seeking, concern for standards and safety awareness.
- Must have good communication skills, both verbal and written, as dealing with customers will be an essential part of the duties.
go to method of application »
Job Description
- To provide support to the Technical Account Consultant.
- Helping with the calibration of sand mixers.
- Supporting the lab at the customer site on sand and resin performance testing.
- Conducting laboratory work at Umbongitwini site.
- Results reporting.
- Facilitating routine sand testing and projects between customer, Umbongitwini and Chloorkop laboratories.
- Helping with trouble shooting at the foundry floor.
- Stock monitoring and liaising with the stores and purchasing departments.
- Ensure compliance to safety by living the Zero Harm philosophy of AECI.
Qualifications & Experience
- Grade 12.
- Undergrad qualification in Physical Metallurgy
- An individual seeking ECSA Engineering Competency assessment.
- Preferably an individual who resides in Cape Town and surrounding areas.
Method of Application
Use the link(s) below to apply on company website.
Build your CV for free. Download in different templates.